When a Ninebot electric scooter (Segway-Ninebot) detects a fault, it shows a two-digit error code on the display, often with a spanner icon and a series of beeps. Here is what the most common codes mean, what you can check yourself and which parts are involved.
First things first
- Switch the scooter off, wait a few seconds and switch it back on: a temporary fault may clear.
- Connect it to the Segway-Ninebot app: it shows the code and the battery status, and offers firmware updates.
- Always unplug the charger and switch the scooter off before checking a connection. Never open the battery.
- According to Segway's self-test manual, on recent models the number of long beeps gives the tens of the code and the short beeps the units: one long and four short beeps mean code 14.
The main error codes
| Code | Meaning | What to do | MAX G30 parts | ES1-ES4 parts | E22E-E45E parts |
|---|---|---|---|---|---|
| 10 | Abnormal communication with the dashboard. | With the scooter off, check that the dashboard cable is firmly connected and that its pins are not bent. Otherwise, the dashboard (first) or the controller needs replacing. | display, wiring harness | display, controller cable | display |
| 11 to 13 | Controller fault. | Contact after-sales service. | controller | controller | controller (E25E, E45E) |
| 14 | Throttle sensor fault. | Check that the throttle springs back fully at start-up, without being pressed, then restart. If it sticks or the code persists, the throttle needs replacing. | throttle | throttle | — |
| 15 | Brake lever sensor fault. | Check that the brake lever springs back fully at start-up, then restart. If the code persists, the lever needs replacing. | brake lever | brake lever | — |
| 18 | Motor sensor fault. | With the scooter off, check the connection between the motor and the controller, unplug it and plug it back in. If the code persists, the motor needs replacing. | hub motor | L30 motor (ES2, ES4), L25 motor (ES1) | — |
| 21 | Battery communication error. | Check the connection between the battery and the controller, unplug it and plug it back in. If the code persists, the battery needs replacing. | MAX G30 battery, MAX G30E II battery | internal battery | E22E battery, E25E, E45E battery |
| 23 | Abnormal battery condition. | Connect the scooter to the Segway-Ninebot app, check the battery status and update the firmware if the app offers it. If the fault persists, the battery is at fault. | MAX G30 battery, MAX G30E II battery | internal battery | E22E battery, E25E, E45E battery |
| 35 | Controller fault. | Contact after-sales service. | controller, G30E II controller | controller | controller (E25E, E45E) |
| 39 | Abnormal battery temperature. | Put the scooter somewhere between −10 °C and 50 °C, let it rest for at least half an hour, then switch it back on. If the code persists, the battery needs replacing. | MAX G30 battery, MAX G30E II battery | internal battery | E22E battery, E25E, E45E battery |
| 40 | Controller fault. | Contact after-sales service or an authorised repairer. | controller, G30E II controller | controller | controller (E25E, E45E) |
The meaning of a code can vary slightly from one model to another: if in doubt, rely on the Segway-Ninebot app for your exact model.
Need help?
If the code persists after these checks, contact us with your scooter model and the code shown. Find all parts by model: Ninebot MAX G30, Ninebot ES1, ES2, ES4, E22E, E25E, E45E.